Mechanical installation
What this chapter contains
This chapter describes the mechanical installation of the drive cabinet generally.
Follow the specific instructions given by the panel builder. For the mechanical
assembly and dimensional drawings of the drive module, refer to ACS800-04/04M/
U4 Cabinet Installation [3AFE68360323 (English)].
Before installation
Delivery check
The drive delivery contains:
• drive cabinet including factory installed options such as optional modules
(inserted onto the RMIO board in the RDCU unit)
• residual voltage warning stickers
• hardware manual
• appropriate firmware manuals and guides
• appropriate optional module manuals
• delivery documents.
Requirements for the installation site
Check the installation site according to the requirements below. See
for the allowed operation conditions of the drive.
Cooling air flow
Provide the drive with the amount of clean cooling air given in Technical data /
data
or
NEMA
data.
31
Technical data
IEC
Mechanical installation