Roland AT900 Music Atelier Owner's Manual page 181

3.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-23.eps
4.
Touch < > (Utility) to open the Utility
screen.
The Utility screen appears.
fig.07-24.eps
5.
Touch <Rename>.
The Rename screen appears.
fig.07-25.eps
6.
Touch the character select button (
to switch among uppercase/lowercase/
symbols.
Touch the character select button repeatedly to cycle
through the available choices, like this: uppercase →
lowercase → symbols → uppercase...
Recording/Playing Back What You Play
7.
Touch the screen to specify the desired
character.
The following characters can be selected.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
! " # % & ' ( ) * + , - . / : = ? ^ _ 0 1 2 3 4 5 6 7 8 9
To cancel operation, touch <Cancel>.
8.
When you're done making the settings, touch
<OK>.
The new name is now inserted.
fig.07-26.eps
You cannot directly change or edit the name of a
performance song stored on a USB memory or floppy disk.
NOTE The song must first be loaded (p. 181) into the instrument,
edited, and then saved to USB memory or floppy disk
again.
You can also access the Rename screen as follows.
1.
Touch <
)
The Utility screen appears.
2.
In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
3.
Touch <Rename> on the Edit Menu screen.
The Rename screen appears.
Deletes a character.
Inserts a space (blank).
Move the cursor (the symbol that
indicates the location at which
characters will be input) to left or right.
> (Utility) on the Rec/Play screen.
179