Roland AT900 Music Atelier Owner's Manual page 196

Editing Your Musical Performance Data
5.
Touch the "Event" value (the type of
performance data that you wish to erase).
6.
Touch < ><
type of performance data that you wish to
erase).
fig.08-12.eps
ALL, NOTE, PANEL, EXPRESSION, VOICE, TEMPO
7.
When you're done making the settings, touch
<Exit>.
8.
Touch the "Track" value (the track from which
data will be erased).
9.
Touch < ><
track from which data will be erased).
If you have selected EXPRESSION, VOICE and TEMPO
as the type of recording to be erased, you need not
specify the track.
ALL, RHYTHM, ACCOMP, BASS, LOWER, UPPER,
SOLO, CONTROL
If you select "ALL," the recording will be erased from all
parts.
10.
When you're done making the settings, touch
<Exit>.
11.
Touch the "From" value (the measure at which
erasure will begin).
12.
Touch < ><
at which erasure will begin).
13.
When you're done making the settings, touch
<Exit>.
194
> to specify the "Event" (the
Setting
> to specify the "Track" (the
Track
> to set "From" (the measure
14.
Touch the "For" value (the number of
measures from which the data will be erased).
15.
Touch < ><
measures from which the data will be erased).
If you wish to erase to the last measure (bar), set "for:
ALL."
16.
When you're done making the settings, touch
<Exit>.
17.
Touch <Execute>.
The following display appears.
fig.08-23.eps
To cancel operation, touch <Cancel>.
18.
Touch <OK> to erase the performance data.
Once the performance data has been erased, you are
returned to the Erase Event screen.
> to set "For" (the number of