Adding Reverberation To The Sound (Reverb Effect) - Roland AT900 Music Atelier Owner's Manual

Adding Reverberation to the Sound (Reverb Effect)

Reverb is an effect that adds a sense of spaciousness to the sound, creating
the illusion of playing in a large or small concert hall, a large or small room,
a small club, etc.
fig.05-16-1.eps
Max Max
Min Min
1.
Press the Reverb [▲] or [▼] buttons to adjust the overall
Reverb amount.
When you press the up button [▲], additional Reverb is applied. Pressing the
down button [▼] decreases the Reverb level. If none of the Reverb indicators
are lit, the Reverb effect will not be heard.
When you press the Reverb [▲] [▼] buttons, the Part Balance Monitor screen
appears. In the Part Balance Monitor screen you can check the reverb depth.
fig.01-27.eps
Max Max
Min Min
Applying Various Effects to the Sound
The Part Balance Monitor
screen is displayed for several
seconds and then closes
automatically.
If you touch <Hold>, the screen
continues to be displayed until
you touch <Exit> again.
149