Enabling Transmission Of Pc Numbers; Setting The Pc Number - Roland AT900 Music Atelier Owner's Manual

Various Other Settings

Enabling Transmission of PC Numbers

Transmission of PC (Program Change) numbers can be
switched ON/OFF when a Registration is selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Send PC
Switch.
fig.00-37.eps
3.
Touch the Send PC Switch setting to switch
between "ON" and "OFF."
Each time you touch the Send PC Switch setting, it will
alternate between "ON" and "OFF."
Setting
ON PC numbers are transmitted
OFF PC numbers are not transmitted
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
222
Descriptions

Setting the PC Number

You can specify the Program Change number that will be
transmitted from MIDI Out when a Registration is selected.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Bank MSB
(Bank Select MSB), Bank LSB (Bank Select LSB),
or PC Number (Program Change Number).
fig.00-37.eps
3.
Touch either <Bank MSB>, <Bank LSB>, or <PC
Number> setting.
fig.09-28.eps
4.
Touch < ><
Menu
Bank MSB
Bank LSB
PC Number
5.
Touch <Exit>.
> to change the setting.
Setting
0–127
0–127
1–128