Formatting A Usb Memory (Format); Displaying A Graphic At Power-Up - Roland AT900 Music Atelier Owner's Manual

Various Other Settings
Formatting a USB Memory
(Format)
The process of preparing USB memory or floppy disks so that
they can be used with the ATELIER is called "initialization"
(formatting).
In certain cases, particularly with floppy disks, the media is
formatted for a specific type of device. If the media format
does not match the ATELIER's, you will not be able to use that
media with the ATELIER.
1.
Connect the USB memory to the external
memory connector
If you want to initialize a floppy disk, connect your
floppy disk drive (sold separately) to the Ext Drive
connector, and insert the floppy disk.
2.
Touch <Registration> on the Main screen.
3.
Touch <go to Save>.
The Registration Save screen appears.
4.
Touch < ><
"
Choose Ext Memory
"
memory, or choose
floppy disk.
5.
Touch < > (Utility).
The Utility screen appears.
6.
Touch <Format>.
The Format screen appears.
If you touch <Cancel>, you will return to the Registration
Save screen without formatting.
7.
Touch <OK> to start formatting.
When the format is finished, the Registration Save
screen returns.
Never attempt to remove the USB memory until formatting is
NOTE
complete.
232
> to select the media.
"
if you want to initialize USB
"
Disk if you want to initialize a

Displaying a Graphic at Power-up

The ATELIER allows you to load a favorite graphic into internal
memory, and have it be displayed when the power is turned
on.
1.
Use your computer to create a graphic image
file that meets the following criteria:
Size 800 x 480 pixels
Color 24 bit colors
Format image saved in BMP format
1–8 characters in length (lowercase is ok).
A filename extension of ".BMP" must be
added after the name.
The following characters can be used to
name an image.
A B C D E F G H I J K L M N O P Q R S T
Name
U V W X Y Z a b c d e f g h i j k l m n o p
q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 # $
% & ' ( ) - @ ~ { } ^ _ !
NOTE
2.
Using your computer, save the image that you
want to load into the ATELIER on external
media.
3.
Connect the external media containing the
image to the ATELIER.
If you're using USB memory, connect it to the external
memory connector. If you're using a floppy disk, connect
the separately purchased floppy disk drive to the Ext
Drive connector.
4.
Touch <System> on the Main screen.
The System screen appears.
5.
In the System screen, touch <Utility>.
fig.00-38.eps
If you use a character that cannot be
used in a name, it will be replaced by
another character when displayed.