Changing The External Memory Setting; Turning The Remote Function On/Off - Roland AT900 Music Atelier Owner's Manual

Various Other Settings

Changing the External Memory Setting

In some cases, when USB memory is connected to the external
memory connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the external
memory setting.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Ext Memory
Mode.
fig.09-44.eps
3.
Touch the Ext Memory Mode setting to switch
between "Mode 1" and "Mode 2."
Each time you touch the Ext Memory Mode setting, it will
alternate between "Mode 1" and "Mode 2."
MODE 1, MODE 2
4.
Touch <Exit>.
5.
Turn on the power once again.
226
Setting

Turning the Remote Function On/Off

You can turn the Remote function on (enabled) or off
(disabled).
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Remote
Control.
fig.10-12.eps
3.
Touch the Remote Control setting to switch
between "ON" and "OFF."
Each time you touch the Remote Control setting, it will
alternate between "ON" and "OFF."
Setting
The remote control unit will operate the
ON
ATELIER.
The remote control unit will be disabled.
OFF You will not be able to operate the
ATELIER using the remote control.
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Descriptions