Changing The Pitch Bend Range; Adjusting The Sensitivity Of The D Beam Controller - Roland AT900 Music Atelier Owner's Manual

Changing the Pitch Bend Range

This setting allows you to choose the maximum amount of Pitch
change (range) permissible when using Pitch Bend. The range
can be set anywhere between 1–12 (in semitone units; with a
maximum of one octave).
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Controller>.
The Controller screen appears.
3.
Touch < >< > to display the Pitch Bend
Range.
fig.09-14.eps
4.
Touch the Pitch Bend Range setting.
fig.09-15.eps
5.
Touch < >< > to change the setting.
1–12 (semitone steps)
6.
Touch <Exit>.
Drums/SFX is fixed at one octave range, regardless of this
NOTE
setting.
Setting
Adjusting the Sensitivity of the D Beam
Controller
You can adjust the sensitivity of the D Beam controller.
Increasing this setting will make the D Beam controller more
responsive.
The sensitivity of the D Beam controller can vary depending on
the brightness of the surroundings. If it does not operate as
you expect, please readjust the sensitivity.
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Controller>.
The Controller screen appears.
3.
Touch < >< > to display the D Beam
Sensitivity.
fig.09-14.eps
4.
Touch the D Beam Sensitivity setting.
fig.09-15.eps
5.
Touch < >< > to change the setting.
1–10
6.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Various Other Settings
Setting
213