Changing The Reverb Type - Roland AT900 Music Atelier Owner's Manual

Applying Various Effects to the Sound

Changing the Reverb Type

By changing the reverberations of the notes, you can enjoy the
atmosphere of performance in a wide variety of different
locations.
1.
Touch <Sound/KBD> on the Main screen.
fig.05-08.eps
The Sound/Keyboard screen appears.
fig.VoiceList.eps
2.
Touch <Effect>.
The Effect screen appears.
fig.05-17.eps
3.
Touch < >< > to display the Reverb Type.
150
4.
Touch the value setting buttons for Reverb
Type to adjust the setting.
The following screen appears.
fig.05-18.eps
5.
Touch < ><
Display
Simulates the reverb of a conference
ROOM 1
room
Simulates the reverb of a
ROOM 2
performance lounge
Simulates the reverb of a large, open
ROOM 3
room
Simulates the reverb of a large
HALL 1
concert hall
Simulates the reverb of a small
HALL 2
concert hall
SMALL
The reverberation of a small church
CHURCH
LARGE
The reverberation of a large church
CHURCH
CATHEDRAL
The reverberation of a cathedral
PLATE Applies a bright, metallic reverb
An echo-like sound repeated several
DELAY
times
Similarly to the above but where the
PAN DELAY sound is panned between the left and
right speakers
It is not possible to modify the delay time (delay interval)
NOTE
when "DELAY" or "PAN DELAY" is selected.
6.
Touch <Exit>.
> to change the setting.
Description