Various Other Settings
Adjusting the Initial Touch Sensitivity
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of volume.
This adjusts the amount of the Initial Touch effect applied.
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch either <Upper>, or <Lower>.
To change the initial touch setting of
Upper
the Upper part
To change the initial touch setting of
Lower
the Lower part
3.
Touch <
><
> to display the Initial Touch.
fig.09-03.eps
4.
Touch the Initial Touch value (OFF, 1–10).
5.
Touch <
><
Setting
Initial Touch is on.
Striking the keys more forcefully will
produce correspondingly louder
1–10
sounds.
The change in volume when the keys
are played forcefully increases as the
value is increased.
Initial Touch is off.
OFF
Volume remains constant regardless of
how hard you play.
6.
Touch <Exit>.
210
> to edit the value.
Descriptions
Changing the Pedalboard Polyphony
You can set the Bass Pedalboard to play simultaneous multiple
notes or single notes only.
1.
Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Pedal>.
The Pedalboard screen appears.
3.
Touch <
><
> to display the PedalBass
Mode.
fig.09-04.eps
4.
Touch the PedalBass Mode setting to switch
between "MONOPHONIC" and
"POLYPHONIC."
Each time you touch the PedalBass Mode setting, it will
alternate between "MONOPHONIC" and
"POLYPHONIC."
Setting
MONOPHONIC
POLYPHONIC
5.
Touch <Exit>.
Descriptions
Only single notes can be played.
Multiple notes can be played.