Removing Finalization - Roland CD-2e Owner's Manual

Erasing Tracks from a CD-RW Disc

Removing Finalization

* In order to perform this operation, you'll need the included, dedicated AC adaptor.
1
2
3
78
(continued)
You can remove finalization from a CD-RW disc (Page 83) so that the disc can once again
be used for recording.Removing finalization will not erase the recorded tracks.
Insert the CD-RW disc that you want to edit, and press the [CD] button.
CD becomes the audio source.
Press the [MENU] button to access the menu screen, and choose
"Unfinalize?"
If you're sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.finalize-mssg-e.eps
The display will show "Processing...", and finalization will be removed from the disc.
During this process, a timer is displayed, counting down the time until the operation is
completed.
When finalization has been removed, you're returned to the audio source screen.
Important
You can't remove finalization from a CD-R disc.
fig.menu-finalize-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose "Unfinalize?"
Press the [ENTER] button to confirm your choice.
Count-down (min:sec)