Roland CD-2e Owner's Manual page 115

SD Memory Card-Related Problems
Problem
The SD memory card is
not detected
Normal playback does
not work
●
Could the SD memory card be of a capacity that is not supported?
➔
Check the capacity of the SD memory card, and use a card of a capacity
supported by the CD-2e.
●
Is the SD memory card inserted all the way into the slot?
➔
Make sure that the card is oriented correctly, and that it's pushed all the
way into the slot.
●
Could you have turned off the power while recording, or could the SD
memory card have been subjected to a strong impact?
➔
It's possible that the data has been damaged. Reformat the SD memory
card.
●
Is the audio source set to "SD"?
➔
Press the [SD CARD] button to choose "SD" as the audio source.
●
Could you have inserted an SD memory card on which nothing has
been recorded?
➔
Insert a different SD memory card.
●
Could you be using repeat playback?
➔
Turn the repeat setting "Off" so that the
●
Could you be using A-B Repeat playback?
➔
Press the [REPEAT] button to get the A-B Repeat icon (
➔
Alternatively, press the [
playback will be defeated.
●
Could the playback speed have been changed?
➔
Set the Speed setting to "0" so that the Speed icon (
●
Could the Pitch setting have been changed?
➔
Set the Pitch setting to "0" so that the Pitch icon (
●
Could the Key setting have been changed?
➔
Set the Key setting to "0" so that the Key icon (
●
Could Center Cancel be turned "On"?
➔
Set the Center Cancel to "Off" so that the Center Cancel icon (
disappears.
●
Could the [ (Play)] button be blinking?
➔
If the button is blinking, the CD is paused. Press the [
to defeat pause.
Cause and Action
or
(Stop)] button to stop playback. A-B Repeat
Troubleshooting
(continued)
See
Page
122
24
104
60
symbol isn't shown. 65
) to disappear. 66
) disappears. 67
) disappears. 63
) disappears. 62
) 64
(Play)] button 60
—
115