Convenient Functions For Recording; Automatically Starting Recording When Audio Is Detected - Roland CD-2e Owner's Manual

Convenient Functions for Recording

Automatically Starting Recording When Audio is Detected

1
2
3
52
When the CD-2e is in recording-standby mode and it detects audio input that exceeds
the specified level, recording will start automatically.
Press the [MENU] button to access the menu screen, and choose "Auto
Rec Start."
Use the [+] [-] buttons to change the value that specifies the level at which
recording will begin automatically.
fig.menu-autorec02-e.eps
Value Explanation
Off (factory setting)
Recording will start when you press [
standby.
-48dB The minimum level (volume) that will automatically initiate recording.
-36dB
-24dB
-12dB
-6dB
-48dB
When you're setting the input level, it's a good idea to check how the level meter moves
at the beginning of the performance. To avoid losing any of the beginning of your
performance, set this trigger level lower than the level at which the performance begins.
Press the [EXIT] button twice.
You're returned to the audio source screen.
This completes preparations for automatically initiating recording.
fig.menu-autorec01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [
Start."
Press the [ENTER] button to confirm your choice.
fig.autorec-level-e.eps
Low
Audio that will automatically initiate recording
] buttons to choose "Auto Rec
(Play)] during recording
High
-6dB