Recording Acoustic Instruments or Vocals
Recording with the Internal Mics
1
2
3
4
* Use the [VOLUME] knob to adjust the headphone volume.
5
36
ig.intmic-e.eps
The internal mics are stereo mics. Sound picked up
by the mic on the left side of the CD-2e is recorded
on the left channel (L), while sound from the mic on
the right side is recorded on the right channel (R).
If you're recording to an SD
memory card
Turn on the power.
(
Insert the SD memory card.
☞
(
Page 24)
Set the audio source to "SD."
Press the [SD CARD] button so it's lit.
fig.selectCD-e.eps
If you want to listen to the recorded audio while you record, connect
headphones to the PHONES jack located on the side of the CD-2e.
The sound received by the internal mics will not be heard from the internal speakers.
You'll need to use headphones if you want to monitor the sound being recorded.
fig.connect-headphone-e.eps
Type of plug that can
be connected
Stereo mini type
On the CD-2e's side panel, set the [MIC SELECT] switch to the "INT"
(internal mic) position.
fig.rec-intmic01.eps
1
☞
Page 21, 22)
2
3
Internal mic
(left channel)
(right channel)
If you're recording to a
CD-R/RW disc
Turn on the power.
(
☞
Insert the CD.
(
Page 27)
Set the audio source to "CD."
Press the [CD] button so it's lit.
fig.selectSD-e.eps
Internal mic
☞
Page 21)