Preparing An Sd Memory Card - Roland CD-2e Owner's Manual

Preparing an SD Memory Card

Here's how to prepare an SD memory card for recording. For details on recommended SD
memory cards, refer to "Recommended SD Memory Card" (Page 122).
Inserting an SD Memory Card
1
24
Insert the SD memory card into the SD card slot on the CD-2e's side
panel.
SD card slot
Printed surface upward
Displayed screen
Audio source
Total number Total playback time
of tracks
fig.SDcard01-e.eps
With the printed surface of the SD memory card
facing upward, insert the card until it clicks into
position.
* Make sure that the SD memory card is oriented
correctly. Forcing it in the wrong way may damage
the CD-2e or the SD memory card.
fig.SDcard02.eps
Status of the SD memory card
Nothing has been recorded yet.
A song has been recorded.
* If the SD memory card has already been recorded, the
total number of songs and the total playback time will
be displayed when the SD memory card information is
loaded.
This SD memory card cannot be used by the CD-2e in its
current state.
* If this message is shown, you'll need to format the card
before using it with the CD-2e. For details, refer to the
section on the following page entitled "If the screen
indicates 'Not CD-2e Format'."