Roland CD-2e Owner's Manual page 61

fig.tansport-remote-e.eps
Remote operations
Continuing Playback from When You Stopped a Song (Resume Function)
If you press the [
position at which you paused, and will resume playback from that location the next time
you start playback. This is called the Resume function.
1
Press the [MENU] button to access the menu screen, and choose
"Resume."
2
Use the [+] [-] buttons to turn the Resume function on/off.
fig.menu-resume02-e.eps
Value
Off (factory setting)
On
3
Press the [EXIT] button twice.
You're returned to the audio source screen.
Operation When Resume is On
After pressing the [
button to re-start playback from the location at which you stopped.
If after pressing the [
button or eject the SD memory card or CD, the Resume function, which had
remembered the location at which you stopped, will be cancelled.
Listening to a CD/ Listening to an SD Memory Card
Song cue, rewind/fast-forward
Song stop/play (pause)
Adjusting the volume
Higher volume.
Lower volume.
(Stop)] button during playback, the CD-2e can remember the
fig.menu-resume01-e.eps
Press the [MENU] button to access the menu screen.
Use the [
Press the [ENTER] button to confirm your choice.
Explanation
The Resume function will be off.
The Resume function will be on. The CD-2e will remember the
position at which playback was stopped.
(Stop)] button to halt playback, you can press the [
(Stop)] button to stop playback, you then press the [
Note
The [VOLUME] knob of the CD-2e itself does not
move when you use the remote control to adjust
the volume. This will mean that the position of the
[VOLUME] knob may not match the actual volume.
] [ ] buttons to choose "Resume."
(continued)
(Play)]
(Stop)]
61