Erasing Tracks From A Cd-Rw Disc; Deleting One Song At A Time (Only The Last Song) - Roland CD-2e Owner's Manual

Erasing Tracks from a CD-RW Disc

Deleting One Song at a Time (Only the Last Song)

* In order to perform this operation, you'll need the included, dedicated AC adaptor.
1
2
3
76
Here's how to erase the last track recorded on a CD-RW disc.
Insert the CD-RW disc that you want to edit.
Press the [MENU] button to access the menu screen, and choose "Erase
Last?"
If you're sure you want to proceed, press the [ENTER] button.
(If you decide to cancel, press the [EXIT] button.)
fig.menu-RWerase-mssg-e.eps
The display will show "Processing...", and the last song will be deleted.
During this process, a timer is displayed, counting down the time until the operation is
completed.
Note
Once you delete a song, you cannot recover the recorded content. Use this operation with care.
Important
You can't erase tracks from a CD-R disc.
●
● If you want to erase a track from a CD-RW disc that's been finalized (Page 83), you'll need
to first remove finalization.
● If you press the [-] button after Step 1, the message screen of
Step 3 will appear immediately. This lets you skip having to
choose a menu item.
fig.menu-RWerase-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose "Erase Last?"
Press the [ENTER] button to confirm your choice.
Count-down (min:sec)
☞
"Removing Finalization" (Page 78)