Assigning Song Numbers While Recording (Marker) - Roland CD-2e Owner's Manual

Convenient Functions for Recording

Assigning Song Numbers While Recording (Marker)

1
54
(continued)
During recording, you can assign a song number so that the subsequent material will be
recorded as the next song. You can assign song numbers in the following three ways.
Assigning song numbers
Press the [ (Record)] button to assign the song number
Automatically assign song numbers at fixed intervals
Assign track numbers when silence is detected
Important
You can't delete a track number once it's been assigned.
●
● You can assign track numbers only during recording.
● You can't assign a new track number less than four seconds after assigning the previous
track number.
● You can assign up to 98 track numbers (99 tracks).
● When you assign a track number to a CD-R/RW disc, two seconds of silence is
automatically inserted in front of the new track number.
fig.marker02-e.eps
Track number
Performance
A
1
CD-R/RW
A
Disc
Silence (two seconds)
● If you're assigning song numbers to a CD-R/RW disc,
you can't assign a new song number while the
message at right is displayed.
* Recording will continue even while this message is displayed.
Press the [ (Record)] Button to Assign a Song Number
This lets you assign a song number whenever you like during recording. If several songs
are being recorded in succession, such as during a live performance, you can assign a
track number to each song while you continue recording.
At the point where you want to assign a track number during recording,
press the [ (REC)] button.
The track number is incremented, and the material that follows will be recorded on the
new track.
fig.marker01-e.eps
Remote control
Track number
B C
2 3
B C
Reference page
This page
Page 55
Page 56