Roland CD-2e Owner's Manual page 51

Layering Your Performance onto an SD Memory Card Song and Recording It
7
Press the [
When the SD memory card song you selected in Step 4-
on the SD memory card will begin simultaneously. Start your performance.
fig.overdub-SD03.eps
Remote control
8
Press the [ (Stop)] button to stop recording.
The recorded song will be added to the end of the SD memory card. If you want to listen
to the song you recorded, press the [
recording.
Important
"Key" (Page 62), "Pitch" (Page 63), and "Speed" (Page 67) settings will automatically
●
revert to the values of the original song only during recording. When recording ends,
these settings will return to the values you specified.
● Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that's being recorded, you'll need to use
headphones. (Refer to Step 4 on Page 36.)
● The playback level ("SD/CD Level") setting is common to the CD and the SD memory
card. When you turn off the power, this setting will return to "0."
● If you decide to stop recording midway through the track, press the [
(Play)] button to begin recording.
Lit
(Play)] button immediately after you stop
begins playing, recording
During recording, the upper right
of the screen will show "SD → SD."
(Stop)] button.
(continued)
51