Removing A Cd - Roland CD-2e Owner's Manual

Preparing a CD
(continued)

Removing a CD

1
If you are unable to eject the disc
* Before using the emergency eject hole to eject the CD, you must turn off the power of the CD-2e.
1
2
28
Press the [EJECT(
After the CD has been ejected, pull it all the way out.
fig.CD04.eps
If the screen shows "Finalize Are You Sure?"
For details on finalizing, refer to "Making a CD-R/RW Disc for Playback on Another CD
Player (Finalize)" (Page 83).
Finalize Response
Yes Press the [ENTER] button.
The CD-RW disc will be finalized and then ejected.
No Press the [EXIT] button.
The CD-R/RW disc will be ejected.
If pressing the [EJECT(
eject hole to forcibly eject the CD.
Turn off the power.
Insert a thin wire (such as a straightened
paper clip) into the emergency eject hole.
Insert and remove the wire repeatedly until the CD
comes out.
)] button.
fig.finalize-mssg01.eps
If the CD-R/RW disc has not been finalized, a message
will ask "Finalize Are You Sure?" If you don't want to
finalize the disc for playing on other CD players, press the
[EXIT] button and remove the disc after it's been ejected.
)] button does not eject the disc, you can use the emergency
☞
( Page 21)
Emergency eject hole