Roland CD-2e Owner's Manual page 48

Sd/cd recorder
Hide thumbs Also See for CD-2e:
Table of Contents

Advertisement

Recording Karaoke
7
48
(continued)
Press the [
(Play)] button to begin recording.
The music CD track you selected in Step 4-
memory card begins simultaneously. Record your vocal or instrumental performance.
fig.overdub-CD03-e.eps
Remote control
When CD playback stops at the end of the song, recording will also end automatically.
If you want to stop recording in the middle of the song, press the [
The recorded song will be added to the end of the SD memory card. If you want to listen
to the song you recorded, press the [
recording.
Important
"Key" (Page 62), "Pitch" (Page 63), and "Speed" (Page 67) settings will automatically
revert to the values of the original song only during recording. When recording ends,
these settings will return to the values you specified.
Sound will not be produced from the speakers while in recording-standby mode or while
recording. If you want to listen to the sound that's being recorded, you'll need to use
headphones. (Refer to Step 4 on Page 36.)
If you hear acoustic feedback (a squealing sound) while using the mic, try changing the
direction of the mic, moving it away from the speakers, or lowering the volume.
When turning the [MIC] knob, you may hear a faint noise when the input level changes,
but this is not a malfunction.
The playback level ("SD/CD Level") setting is common to the CD and the SD memory
card. When you turn off the power, this setting will return to "0."
begins playing, and recording on the SD
Lit
During recording, the upper right
of the screen will show "CD → SD."
(Play)] button immediately after you stop
(Stop)] button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents