Mdsc-8255 Mna Version - Barco MDSC-8255 LED User Manual

3. Display installation
4. Connect the micro-USB interface with a workstation to use the remote control protocol, to update the
display firmware, or to be able to connect any USB peripheral with the USB interfaces of the display.
5. Use any USB peripheral (keyboard, mouse, webcam, ...) by connecting it to the USB interface (a host
PC connected to micro USB-port is required).
Image 3-1
3.1.2

MDSC-8255 MNA version

To connect the interfaces
1. Connect one or more video source(s) to the corresponding video inputs of the display.
UHD 4K video can be connected in three ways:
- 1 x DisplayPort 1.2 MST connected to the Main DisplayPort input or,
- 2 x DisplayPort 1.1 connected to the Main and 2
half (right/left) of the screen or,
- Nexxis link: 2 x 10Gb Ethernet connected to the Main and Secondary SFP+ 10Gb optical Ethernet
interface, where each input drives one half (right/left) of the screen.
Warning:DisplayPort VESA DP 1.2 certified cables for 5.4 Gbps HBR2 are recommended.
2. When the SDI video input is connected, an additional SDI video sink can be connected to the SDI output
(= SDI input loop-through).
3. Screen image clone: The entire active image on the screen (including OSD) can be duplicated to a
FHD (1080p/1080i) signal on the DVI output connector, to which an additional DVI video sink can be
connected.
Note: The DVI output must be enabled in the OSD menu (please refer to "DVI output", page 32).
4. Use any USB peripheral (keyboard, mouse, webcam, ...) by connecting it to the available USB inter-
faces.
5. Connect a headphone to the appropriate output to listen to audio sent over Nexxis.
6. Connect a microphone to the appropriate input to send spoken audio over Nexxis.
7. Connect a (set of) speaker(s) to the line out interface to listen to audio sent over Nexxis.
8. Connect any kind audio player to the line in interface to send audio over Nexxis.
9. Connect the display with Nexxis to use the remote control protocol or to update the display firmware.
12
4 5
2
3
1
DisplayPort input, where each input drives one
nd
K5902133 (451920612482) MDSC-8255 23/11/2017