Table of Contents
Advertisement
To enable/disable image scaling:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Source menu.
3.
Enter the Scaling submenu.
4.
Select Enabled/Disabled as desired and confirm.
4.20 Image source selection
About image source selection
By default, your Nio Fusion 12MP automatically detects the connected image sources and attaches them to
the correct side of the screen. You can also manually select the image sources and control on which side of
the screen they must be displayed.
The Image source selection menu is not available when the KVM switch is enabled (to disable, see
"KVM switch", page
To automatically select image sources
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Sources menu.
3.
Enter the Image Source Selection submenu.
4.
Select the Automatic image source selection mode and confirm.
To manually select image sources
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Sources menu.
3.
Enter the Image Source Selection submenu.
4.
Select one of the following image source selection modes and confirm:
•
One Image Source: Allows to select one image source to display.
•
Two Image Sources: Displays DisplayPort IN 1 on the left side and DisplayPort IN 2 on the right side
of the screen.
•
Expert mode: Allows to select for the left and right side of the screen which image source to display:
DisplayPort IN 1, DisplayPort IN 2 or None.
4.21 KVM switch
About the KVM switch
The Nio Fusion 12MP can be used in dual workstation setup with KVM switch. This allows the display to be
connected to two different workstations and control both with a single keyboard and mouse connected to the
display. Switching the video and controls signals between the two workstations is done with the KVM switch,
which must be enabled as explained below.
Your display system must be specifically set up and configured for KVM input switching. For
instructions, see
To enable/disable the KVM switch
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > Image Sources menu.
37).
"Dual workstation setup with KVM switch", page 13
Advanced operation
R5913350 /05
Nio Fusion 12MP
37
Advertisement
Table of Contents
