4.1.2 Confirming the I/O Number Allocations
I/O numbers and base word numbers are always necessary when writing programs. Always
check to see if the numbers match the design. I/O numbers allocated are determined by the
first word number.
Allocations to unit
Take the following procedure to set the first word number.
PROCEDURE
1. Select "Options" → "FP7 Configuration" from the menu bar.
2. Select "I/O Map" from the field.
3. Double-click the target slot where the operating unit is to be inserted.
4. Select "Analog I/O" and "Output Unit" in the unit selection field.
5. Press the [OK] button.
The first word number specified is set.
4.1 Confirming the I/O Number Allocations and First Word Number
4-3