Panasonic FP7 User Manual page 43

Performance specifications
Items
No. of output points
Voltage
Output range
(resolution)
Current
Voltage input
Conversion
speed
Current input
Total accuracy
Output impedance
(voltage output)
Maximum output current
(voltage output)
Output allowable load resistance
(current output)
Insulation system
Conversion execution/non-
execution channel settings
Function of upper and lower
output clipping limits
Scale conversion settings
Offset/Gain settings
Analog output hold
(while in PROG. mode)
(Note 1) Set any of the following functions in the configuration menu of the tool software or a user program: Output
range, conversion execution/non-execution channel, upper and lower output clipping, scaling processing,
offset/gain, and (PROG. mode) analog output hold settings
(Note 2) If not all channels are used, the conversion speed can be saved by setting non-execution channels with the
function of setting the conversion execution/non-execution channels used.
(Note 3) The full scale (F.S.) on the accuracy of an analog voltage output range from +1 to +5 V and that of an analog
current output range from +4 to +20 mA are 0 to +5 V and 0 to +20 mA, respectively.
4 channels
-10 to +10 V DC (Resolution: 1/62,500)
0 to +10 V DC (Resolution: 1/31,250)
0 to +5 V DC (Resolution: 1/31,250)
+1 to +5 V DC (Resolution: 1/25,000) (see note 3)
0 to +20 mA (Resolution: 1/31,250)
+4 to +20 mA (Resolution: 1/25,000) (see note 3)
25 μs/ch
±0.1% F.S. max. (at +25°C) and ±0.3% F.S. max. (at 0°C to +55°C)
0.5Ω max.
10 mA
500 Ω max.
Between input terminals and internal circuit:
Photocoupler and isolated DC/DC converter
Between channels: Non-isolated
Possible to make non-converted channel settings.
Upper and lower output limits can be set for digital input values.
Setting range: -32,500 to +32,500
A desired value within the digital input range can be set.
Setting range: -30,000 to +30,000
A desired value within the digital input range can be set for the offset value.
Setting range: -3,000 to +3,000
A desired value within the digital input range can be set for the gain value.
Setting range: +9,000 to +11,000 (90% to 110%)
A desired output value while in PROG. mode can be set as a digital value.
Setting range: -31,250 to +31,250
8.1 Specifications
Description
8-3