Panasonic FP7 User Manual page 47

Individual setting area per channel
Unit
memory
Name
number
(Hex)
UM 0010B
UM 0011B
Offset value
UM 0012B
UM 0013B
UM 0010C
UM 0011C
Gain value
UM 0012C
UM 0013C
UM 0010D
UM 0011D
Scale conversion
max. value
UM 0012D
UM 0013D
UM 0010E
UM 0011E
Scale conversion
min. value
UM 0012E
UM 0013E
UM 0010F
Upper limit for
UM 0011F
upper and lower
UM 0012F
output clipping
UM 0013F
UM 00110
Lower limit for
UM 00120
upper and lower
UM 00130
output clipping
UM 00140
UM 00111
Analog output
UM 00121
while in PROG.
UM 00131
mode
UM 00141
(Note) The unit memory numbers in the above table are listed for CH0, CH1, CH2, and CH3 in numerical order.
Default
Set an offset value at the time of using the offset/gain processing
function.
K0
Setting range: -3,000 to +3,000 (Specified with a signed integer)
Set an offset value at the time of using the offset/gain processing
function.
K10,000
Setting range: +9,000 to +11,000 (0.9x to 1.1x: Specified with a
signed integer)
Set the maximum value at the time of using the scale conversion
function.
K10,000
Setting range: -30,000 to +30,000 (Specified with a signed integer)
Set the minimum value at the time of using the scale conversion
function.
K0
Setting range: -30,000 to +30,000 (Specified with a signed integer)
Set the upper limit to turn ON the upper limit relay for the use of the
function of clipping upper and lower output.
K0
Setting range: -32,500 to +32,500 (Specified with a signed integer)
Set the upper limit to turn ON the upper limit relay for the use of the
function of clipping upper and lower output.
K0
Setting range: -32,500 to +32,500 (Specified with a signed integer)
Set a digital value corresponding to the analog output when a
desired value is set for the analog output while in PROG. mode.
K0
Setting range: -31,250 to +31,250 (Specified with a signed integer)
8.3 List of Unit Memory
Setting range and description
8-7