68
Tool:
73
33
83
2 Wrenches (19-17)
Step 7
Pull the Leg Extension Cable (33) upwards to the Leg Extension Tube (8). Then attach the
end of the Leg Extension Cable (33) onto the Leg Extension Tube (8) with one M10x25 Hex
Bolt (83), one M10 Nylon Lock Nut (68), and two Ø10 Flat Washers (73). Tighten bolt and
nut with two Wrenches provided.
PLEASE REFER TO THE "CABLE LOOP DIAGRAM" SECTION ON PAGE
25.
Hardware:
(83) M10x25 Hex Bolt
(73) Flat Washer Ø10
(68) Nylon Lock Nut M10
1 PC
2 PCS
1 PC
45