Table of Contents
Advertisement
73
84
Tool:
2 Wrenches (19-17)
Step 4
Pull the Leg Extension Cable (33) upwards to the Crossed Double Floating Pulley Bracket
(18). Draw the Leg Extension Cable (33) around the Pulley (60) on the Crossed Double
Floating Pulley Bracket (18). Then attach the Pulley (60) onto the Crossed Double Floating
Pulley Bracket (18) with one M10x45 Hex Bolt (84), one M10 Nylon Lock Nut (68), and two
Ø10 Flat Washers (73). Tighten bolt and nut with two Wrenches provided.
PLEASE REFER TO THE "CABLE LOOP DIAGRAM" SECTION ON PAGE
25.
Pulley:
(60) Pulley
1 PC
Hardware:
(84) M10x45 Hex Bolt
1 PC
73
68
(73) Flat Washer Ø10
18
2 PCS
42
27
(68) Nylon Lock Nut M10
1 PC
Advertisement
Table of Contents
