YASKAWA SI-P3/V Installation Manual page 23

4.
Reattach the bottom cover.
5.
Connect the PROFIBUS-DP Option to the drive. Properly secure the tabs on the left
and right sides of the PROFIBUS-DP Option to the drive case.
Figure 12
6.
Connect the ground cable from the drive ground terminal to the PROFIBUS-DP
Option ground. When wiring the PROFIBUS-DP Option, pass the ground cable
through the inside of the drive bottom cover, then pass the ground cable into the
through-hole at the front of the PROFIBUS-DP Option.
Figure 13
YASKAWA ELECTRIC TOBP C730600 23C 1000-Series Option SI-P3/V, SI-P3/T Installation Manual
Tabs should line up
Figure 12 Attach PROFIBUS-DP Option
Ground cable
Through-hole
Ground
for ground cable
cable
Figure 13 Ground Cable Connection
5 Installation Procedure
Tabs should line up
Drive ground
terminal
Pass the ground
cable through
the bottom cover
of the drive.
23