3
Receiving
Please perform the following tasks after receiving the PROFIBUS-DP Option:
• Inspect the PROFIBUS-DP Option for damage.
If the PROFIBUS-DP Option appears damaged upon receipt, contact the shipper
immediately.
• Verify receipt of the correct model by checking the information on the nameplate (see
Figure
2).
• If you receive the wrong model or the PROFIBUS-DP Option does not function properly,
contact your supplier.
◆
Contents and Packaging
Description:
_
Quantity:
◆
Tool Requirements
A Phillips screwdriver (M3, M3.5 to M6
PROFIBUS-DP Option.
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare PROFIBUS cables for wiring are not listed in this manual.
YASKAWA ELECTRIC TOBP C730600 23C 1000-Series Option SI-P3/V, SI-P3/T Installation Manual
Table 2 Contents of Package
Option Unit
1
) metric or (#1, #2
<1>
Ground Cables
4
) U.S. standard size is required to install the
<1>
3 Receiving
Warning Labels
1
Installation
Manual
(This book)
MANUAL
1
11