Samsung SF6500 Service Manual page 58

6-40 Micro Switch
1. Before you disassemble the Micro switch, you
should remove :
♦ Side covers (See page 6-10)
♦ Top cover (See page 6-11)
2. Unplug the connector (H3) from the HVPS
board, then release the connector wire by
removing the cover switch that ties the wire in a
bundle.
Figure 6.88
Samsung Electronics
3. Insert a flat blade screw driver or something into
the hole as shown and push it outwards to
release the switch.
Cover switch
Disassembly and Reassembly
Micro Switch
Bracket
Figure 6.89
6-29