Disassembly and Reassembly
6-38 Guide Paper
1. Press the release switch located on the right side.
Figure 6.84
6-39 Manual Sensor
1. Before you disassemble the Manual sensor, you
should remove :
♦ Side covers (See page 6-10)
♦ Top cover (See page 6-11)
♦ Guide paper (See page 6-28)
2. Unplug the connector (H6) from the HVPS
board, then release the connector wire by
removing the cover switch that ties the wire in a
bundle.
Figure 6.86
6-28
2. Remove the two screws securing the Guide
paper to the main frame. Take it out.
3. Insert a flat blade screw driver or something into
the hole as shown. Push down to release the
sensor and take it out.
Cover switch
Guide paper
Figure 6.85
Manual Sensor
Figure 6.87
Samsung Electronics