6-7 Rollers
(ADF, Feed, D.Exit)
1. Before you disassemble the roller, you should
remove :
♦ Scan unit (See page 6-1)
♦ White roller (See page 6-2)
♦ OPE unit (See page 6-3)
2. Remove the two screws securing the scan paper
guide and take out the Scan paper guide.
Figure 6.8
Samsung Electronics
3. Take out the rollers from the Scan unit.
Feed roller
D. Exit roller
Figure 6.12
Note: Clean the surface of the rollers with ethyl
alcohol. After wiping them, be sure to dry
completely with a soft cloth.
Disassembly and Reassembly
ADF roller
6-5