Ope Unit - Samsung SF6500 Service Manual

6-5 OPE Unit

1. Before you disassemble the OPE unit, you
should remove :
¥ Scan unit (See page 6-1)
2. Turn the scan unit over. Place the unit on soft
cloth to avoid the accidental scratch on the
surface of the unit.
3. Unplug the OPE connector from the scan PBA
and remove the one earth screw.
Figure 6.6
Samsung Electronics
4. Open the OPE cover. Twist the tie stopper until it
is released. The OPE unit has secured by the tabs
on the bottom end to the Scan unit as shown.
Pull the tabs outwards so that the OPE unit is
separated from the Scan unit.
Tab
Figure 6.7
Disassembly and Reassembly
OPE unit
Tie stopper
6-3