Disassembly and Reassembly
6-8
Scan Motor
1. Before you disassemble the Scan motor, you
should remove :
♦ Scan unit (See page 6-1)
♦ White roller (See page 6-2)
♦ OPE unit (See page 6-3)
2. Turn the scan unit over and unplug the motor
connector from the Scan PBA.
Figure 6.13
3. Turn the Scan unit back. Remove the two screws
securing the Scan paper guide, and take out the
scan paper guide.
Figure 6.8
6-6
4. Remove the two screws securing motor cover
5. Remove the two screws securing the motor to the
Scan Paper Guide
6. Remove the two screws securing the motor to the
and take out the motor cover.
Figure 6.14
Scan unit, and take out the motor ass'y.
Figure 6.15
motor bracket.
Figure 6.16
Motor bracket
Samsung Electronics