Samsung SF6500 Service Manual page 53

Disassembly and Reassembly
6-33 Pick Up Sensor
1. Before you disassemble the Pickup sensor, you
should remove :
♦ Side covers (See page 6-10)
♦ Top cover (See page 6-11
♦ Upper frame (See page 6-23)
2. Remove the four screws from the upper frame
and separate the Upper frame into the Upper
guide and Plate.
Figure 6.74
6-24
3. Use a flat blade screw driver or something to
push up the Pick up sensor from the bottom.
Then take out the sensor.
Upper Plate
Upper Guide
Pick up Sensor
Figure 6.75
Samsung Electronics