Spectralink Ip-Dect Server 200 Led Indicators - SpectraLink IP-DECT 200 Installation Manual

Spectralink IP-DECT Server 200 Deployment and Installation Guide

Spectralink IP-DECT Server 200 LED Indicators

Below you will find information about LED indicators on the server.
Front Cover
The server front cover has one indicator describing the server faults and failures. The indicator is off
when the server is not powered. The LED flashes when the server initializes. The indicator is on
when the server is operating.
LED Indicator
Steady green
Slow green flashing
Fast green flashing
Steady red
Steady red for 5 seconds followed by
fast red flashing
Red flashing
LAN Port on Face Plate
LED Indicator
LINK Indicator - yellow
LINK Indicator - green flashing
14212650-IG, Edition 1.0
April 2018, Original document
Meaning
OK and idle.
OK and active voice call.
Busy (all channels are in use).
Reset/shutdown in progress.
Reset to factory settings.
Error or rebooting
Meaning
Link layer software has established connection.
Activity
9