HPE Apollo 2000 Gen10 User Manual page 26

Online/Activity LED (green)
On, off, or flashing
On, off, or flashing
On
On
1 flash per second
1 flash per second
26 Identifying components and LEDs
Fault/UID LED (amber/blue)
Alternating amber and blue
Solid blue
Flashing amber
Off
Flashing amber
Off
Definition
One or more of the following
conditions exist:
• The drive has failed.
• A predictive failure alert has
been received for this drive.
• The drive has been selected
by a management application.
One or both of the following
conditions exist:
• The drive is operating
normally.
• The drive has been selected
by a management application.
A predictive failure alert has been
received for this drive. Replace
the drive as soon as possible.
The drive is online but is not
currently active.
Do not remove the drive.
Removing the drive might
terminate the current operation
and cause data loss.
The drive is part of an array that
is undergoing capacity expansion
or stripe migration, but a
predictive failure alert has been
received for this drive. To
minimize the risk of data loss, do
not remove the drive until the
expansion or migration is
complete.
Do not remove the drive.
Removing the drive might
terminate the current operation
and cause data loss.
The drive is rebuilding, erasing,
or is part of an array that is
undergoing capacity expansion
or stripe migration.
Table Continued