HPE Apollo 2000 Gen10 User Manual page 22

Item
1
3
Apollo r2600 Gen10 Chassis (1U and 2U servers using the embedded SATA S100i or a Smart Array
controller)
Drive bays 1-5, 1-6, 2-1, 2-2, 3-5, 3-6, 4-1, and 4-2 support both SFF SmartDrives and NVMe drives.
All other drives bays support SFF SmartDrives only.
One 1U server corresponds to a maximum of six drives.
• Server 1 corresponds to drive bays 1-1 through 1-6.
• Server 2 corresponds to drive bays 2-1 through 2-6.
• Server 3 corresponds to drive bays 3-1 through 3-6.
• Server 4 corresponds to drive bays 4-1 through 4-6.
One 2U server corresponds to a maximum of twelve drives.
• Server 1 corresponds to drive bays 1-1 through 2-6.
• Server 3 corresponds to drive bays 3-1 through 4-6.
Apollo r2800 Gen10 Chassis with 16 NVMe
IMPORTANT: The HPE Apollo r2800 Gen10 Chassis with 16 NVMe does not support servers using
the embedded SATA HPE Dynamic Smart Array S100i Controller or any type-p plug-in Smart Array
Controller with internal ports and cables.
One 1U server corresponds to a maximum of four NVMe drives.
• Server 1 corresponds to drive bays 1-1 through 1-4.
• Server 2 corresponds to drive bays 2-1 through 2-4.
• Server 3 corresponds to drive bays 3-1 through 3-4.
• Server 4 corresponds to drive bays 4-1 through 4-4.
One 2U server corresponds to a maximum of eight NVMe drives.
• Server 1 corresponds to drive bays 1-1 through 2-4.
• Server 3 corresponds to drive bays 3-1 through 4-4.
22 Identifying components and LEDs
Description
Server 1 drive bays
Server 3 drive bays
Supported drives
Drive bays 5, 6, 9, and 10 support both SFF
SmartDrives and NVMe drives. All other drive bays
support SFF SmartDrives only.
Drive bays 5, 6, 9, and 10 support both SFF
SmartDrives and NVMe drives. All other drive bays
support SFF SmartDrives only.