HPE Apollo 2000 Gen10 User Manual page 28

Item Description
3 Drive status LED
4 Do Not Remove LED
5 Power LED
6 Power button
7 Do not remove button
28 Identifying components and LEDs
Status
Solid green = The drive is a member of one or more logical
drives.
Flashing green = The drive is rebuilding or performing a RAID
migration, stripe size migration, capacity expansion, or logical
drive extension, or is erasing.
Flashing amber/green = The drive is a member of one or more
logical drives and predicts the drive will fail.
Flashing amber = The drive is not configured and predicts the
drive will fail.
Solid amber = The drive has failed.
Off = The drive is not configured by a RAID controller.
Solid white = Do not remove the drive. Drive must be ejected
from the PCIe bus prior to removal.
Flashing white = Ejection request pending
Off = Drive has been ejected
Solid green = Do not remove the drive. Drive must be ejected
from the PCIe bus prior to removal.
Flashing green = Ejection request pending
Off = Drive has been ejected
Press to request PCIe ejection. Removal request can be denied
by the:
• RAID controller (one or more of the logical drives could fail)
• Operating system
Press to open the release lever.