Nvme Ssd Components - HPE Apollo 2000 Gen10 User Manual

Online/Activity LED (green)
4 flashes per second
4 flashes per second
Off
Off
Off

NVMe SSD components

The NVMe SSD is a PCIe bus device. A device attached to a PCIe bus cannot be removed without
allowing the device and bus to complete and cease the signal/traffic flow.
CAUTION: Do not remove an NVMe SSD from the drive bay while the Do not remove LED is
flashing. The Do not remove LED flashes to indicate that the device is still in use. Removing the
NVMe SSD before the device has completed and ceased signal/traffic flow can cause loss of data.
Item Description
1 Locate LED
2 Activity ring LED
Fault/UID LED (amber/blue)
Flashing amber
Off
Solid amber
Flashing amber
Off
Status
Solid blue = The drive is being identified by a host application.
Flashing blue = The drive carrier firmware is being updated or
requires an update.
Rotating green = Drive activity
Off = No drive activity
Definition
The drive is active but a
predictive failure alert has been
received for this drive. Replace
the drive as soon as possible.
The drive is active and is
operating normally.
A critical fault condition has been
identified for this drive and the
controller has placed it offline.
Replace the drive as soon as
possible.
A predictive failure alert has been
received for this drive. Replace
the drive as soon as possible.
The drive is offline, a spare, or
not configured as part of an
array.
Table Continued
NVMe SSD components 27