Service manual
6.
Loosen the Allen set screw (2) that holds the frost
belt onto the motor.
7.
Use a 3 mm Umbraco key (3) as spacer to set the
correct distance.
8.
Follow the procedure in reverse order.
Position of the zoom/focus sensors
The sensors are magnetic sensors with LEDs. The
LED is green if the sensor is powered and the LED is
orange if the sensor is activated by a magnet.
MAC Encore Performance - Revision A, 12-20-2017
2
Figure 53: Replacing the focus lens assembly
3
Figure 54: Setting the correct distance
Figure 55: Position of zoom/focus sensors
3
25 of 46