Fixture Time; Firmware Version; Pro Defaults; Head Home Position Adjustment - Martin RUSH MH-2 Wash User Manual

and press the MENU button to exit the menu mode.

Fixture time

To display the fixture's operating hours counter:
1. Select FIXTURE TIME and press the ENTER button. The display will show
the number of working hours of the unit.
2. To return to a higher level of the menu press the MENU button again. Hold
and press the MENU button to exit the menu mode.

Firmware version

To display the fixture's installed firmware version number:
1. Select FIRMWARE VERSION and press the ENTER button. The display
will show the version of software of the unit.
2. To return to a higher level of the menu press the MENU button again. Hold
and press the MENU button to exit the menu mode.

PRO defaults

To select or de-select PRO defaults:
1. Select PRO DEFAULTS and press the ENTER button. The display will
blink.
2. Use the DOWN and UP buttons to select the YES (set the fixture to PRO
Defaults settings) or NO.
3. Press the ENTER button to set (or, to return to the higher level of the
menu structure without any change press the MENU button).

Head home position adjustment

The fixture head can lose its home position in some cases. To reset this:
1. In the menu structure, hold the ENTER button down for at least 3 seconds
to enter Offset mode.
2. Use the DOWN and UP buttons up to choose PAN OFFSET or TILT
OFFSET. Press the ENTER button and the display will blink.
3. Use the DOWN and UP buttons to adjust the home position of the head on
the pan or tilt axis.
4. Once the correct position has been reached, press the ENTER button to
set this (or, to return to a higher level of the menu structure without any
change press the MENU button).
RUSH MH-2 Wash user manual 21