Martin Exterior Wash 120 User Manual page 18

Connect the wires in the data cable as shown below. Do not connect the shield conductor to ground
(earth) or allow it to come into contact with a connector shell, as this may cause interference.
Wires
Wire color
Signal
Male XLR connector (if used)
Female XLR connector (if used)
1 = DMX shield (black)
18
DMX data link layout
Input pair (red tube)
White/green
DMX in + DMX in -
Pin 3
-
Data connections
2 = DMX in – (green)
3 = DMX in + (white/green)
DMX link connections
TM
Exterior Wash 100 Series User Manual
Output pair (black tube)
Green White/brown
DMX out +
Pin 2 -
- Pin 3
4 = DMX out – (brown)
5 = DMX out + (white/brown)
Shield
Brown Black
DMX out - Common
- Pin 1
Pin 2 Pin 1