Table of Contents
Advertisement
Before using the product for the first time
1.
Read 'Safety information' on page 5 before installing, operating or servicing the fixture.
2.
Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to
operate a damaged fixture.
3.
If testing and/or setting up the fixture before it is hard-wired to a mains supply, install a local power
plug (not supplied) to the end of the supplied power cable.
4.
Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
5.
Check the support pages on the Martin® website at www.martin.com for the most recent user
documentation and technical information about the fixture. Martin® user manual revisions are
identified by the revision letter at the bottom of the inside cover.
10
TM
Exterior Wash
100 Series User Manual
Advertisement
Table of Contents
