Operation; Adjustments - Teledyne T640 User Manual

3.3.

OPERATION

4.

ADJUSTMENTS

08354A DCN7303
6. When complete, as indicated in the Status field, press the Done button and
remove the flash drive. Power off and restart the instrument to complete the
updated firmware installation process.
Upon startup, sampling begins. Allow 10-minute warming period for reliable
readings.
The following equipment, supplies, and expendables are required for sensor
checks and adjustments:
•
for pressure and flow: auditing device (NIST-traceable pressure standard
and flow standard)
•
for PMT Adjustment: SpanDust™
Teledyne API Model T640 PM Mass Monitor 47