3.1.8.
SETUP>EVENTS
08354A DCN7303
Figure 3-11. DAS Data Download
3. To copy the data to the flash drive, press the Start button next to "Download
DAS Data from Instrument." (The Cancel button will be enabled).
4. Wait for the Status field to indicate that the transfer is complete and the
Cancel button becomes the Done button.
5. Press the Done button, then remove the flash drive.
Events are occurrences that relate to any operating function, and are used to
define the conditions that will trigger Alerts (Sections 3.1.3 and 3.1.5). Events
can provide diagnostic information about the instrument, typically referred to as
"Warnings", or they can provide additional instrument functionality, such as
concentration alarms.
The instrument comes from the factory with a number of pre-defined warning
Events, and the Events Configuration page provides the capability for creating
additional, user-defined events (Section 3.1.8.1) and editing them (Section
3.1.8.2).
To view a list of Warnings and Event tags, press the Add button, and highlight a
tag to view its description.
Figure 3-12. Events Page
Teledyne API T640 PM Mass Monitor
36