Alerts; Utilities>Datalog View; Utilities>Alerts Log; Figure 3-3. Alerts Log - Teledyne T640 User Manual

3.1.3.

ALERTS

3.1.4. UTILITIES>DATALOG VIEW
3.1.5. UTILITIES>ALERTS LOG
08354A DCN7303
The Alerts screen shows the status of any active warning conditions or user-
configured Events. (Events are used to define the conditions that will trigger
Alerts; see Section 3.1.8 for detailed information and how to customize Events
through the Home>Setup>Events menu). While Alerts can be cleared from the
Alerts page, all alerts are documented and stored in the Home>Utilities>Alerts
Log (Section 3.1.5).
This utility provides reports on instrument data, the parameters for which are
defined by the user in the data logger (Home>Setup>Data Logging). Section
3.1.7 provides instructions for configuring the data logger.
The Alerts Log (Figure 3-3) displays a history of Alerts (Section 3.1.3) that are
triggered by factory-defined and user-defined Events (Section 3.1.8), such as
warnings and alarms.

Figure 3-3. Alerts Log

Teledyne API Model T640 PM Mass Monitor 31