Connections And Startup - Teledyne T640 User Manual

2.3.

CONNECTIONS AND STARTUP

- High Voltages are present inside the instrument.
- Ensure that the power cord being used is capable of carrying the
- Power connection must have functioning ground connection.
- Do not defeat the ground wire on power plug.
- Turn off instrument power before disconnecting or connecting
- Do not operate with cover off.
Do not operate under conditions outside the environmental
specifications. Operating this instrument under different
environmental conditions, such as corrosive or explosive
environments, electric or electromagnetic fields, areas of ionizing
radiation, or areas conducive to shock or vibration, could damage or
destroy the instrument.
Ensure that the AC power voltage matches the voltage indicated on
the instrument's model/specs label before plugging it into line power.
Note
To maintain compliance with EMC standards, any cable length must
be no greater than 3 meters for all communication connections.
08354A DCN7303
This section presents the various connections for setup and preparing the
instrument for operation (Section 2.8).
WARNING: Electrical Shock Hazard
power rating of the instrument (see rear panel label).
electrical subassemblies.
CAUTION: Avoid Damage to the Instrument
CAUTION: Avoid Damage to the Instrument
Teledyne API Model T640 PM Mass Monitor 17