Table of Contents
Advertisement
7.
Select Configuration > Security > Network > NAS (as shown in
8.
Under System Configuration, change the Mode to Enabled.
9.
Under Port Configuration, change the Admin State of the desired port to any of the 802.1x options (Port-based, Single,
Multi, etc.).
10. Click Save.
FIG. 9 Network Access Server Configuration Page
11. To save the full configuration, select Maintenance > Configuration > Save startup-config.
NOTE: For more extensive Switch Configuration information, click the ? icon at the top-right of the screen.
N7142 User Manual
Figure
9).
Installing the N7142
12
Advertisement
Table of Contents
